关于SKF圆锥孔轴承的安装，对于较大的轴承，建议使用SKF液压推进法（SKF Drive-up Method）.这一方法比以测量游隙减量和锁紧螺母的紧缩角度省时间和更为准确。特大型轴承的安装，可以使用SKF电控安装法（SKF SensorMount Method）来测量内圈的膨胀量。由于感测器是嵌入在轴承的内圈，可以更简易、快速和准确地安装。
For the installation of SKF tapered bore bearings, the SKF Drive-up Method is recommended for larger bearings. This method saves time and is more accurate than measuring clearance reduction and the tightening angle of locking nuts. The expansion of inner ring can be measured by SKF Sensor Mount Method in the installation of extra large bearing. Since the sensor is embedded in the inner ring of the bearing, it can be installed more simply, quickly and accurately.
带圆锥孔的SKF轴承一般是以过盈配合安装。过盈量可以通过测量径向游隙减量或内圈在圆锥形轴颈上轴向位移量来确定。适用于安装圆锥孔球面滚子轴承的方法包括：测量游隙减量、测量锁紧落幕的锁紧角度、测量轴向推进距离、测量内圈膨胀量、内径100mm或以下的小轴承，可以通过测量锁紧螺母的锁紧角度来安装。
Bearings with tapered holes are usually fitted with interference fit. The interference can be determined by measuring the radial clearance reduction or the axial displacement of the inner ring on the conical journal. Suitable for installation of tapered hole spherical roller bearings include: measuring clearance reduction, measuring locking angle of locking screen, measuring axial propulsion distance, measuring inner ring expansion, inner diameter of 100 mm or less small bearings, can be installed by measuring locking angle of locking nut.